Konica Minolta 7222 - Manual (Page 12)

Features of the 7222/7228/7235 (continued)
viii
• Copy Mode
Selects the desired simplex mode (1 1 or 2 1); or duplex mode (1 2 or 2 2).
• Counter List
Displays on the screen and prints the following data: total counter of the machine, FAX TX/
RX counter, printer counter and the scanner counter.
• Density Shift
Shifts each of nine density levels in four density modes (Auto, Text, Photo, Increase
Contrast) to three levels lighter or three levels darker.
• Folded Original
This feature sets the RADF to accept folded originals.
• Frame/Fold Erasure
Erases border and/or fold image area using Frame (1 - 15mm), Fold (1 - 30mm), or Frame
& Fold.
• Image Insert
Stores pages in memory from the platen glass, and inserts the pages into a document
copied from the document feeder.
• Image Shift
Creates or removes a margin at the top, bottom, right and left edges (shift amount from
- 250 mm ~ + 250 mm, in 1 mm increments); and reduces image to prevent image loss
(reduce & shift amount from - 250 mm ~ + 250 mm, in 1 mm increments).
• Interrupt Copying
Interrupts job-in-progress to perform an urgent copy, using any of the copier features for
the interrupt job.
• Job List
Displays the Job List Screen to view the current machine status, changes the operation
order of reserve jobs, or deletes the unused reserve job.
• Job Memory
Programs up to 15 jobs and recalls each job by job number, as needed. All compatible
platen glass functions can be programmed into Job Memory directly after they are
selected.
• Lens Mode (Zoom)
Selects fixed ratios, three reduction, three enlargement, and three user-set ratios.
Zoom ratios can be selected from 25 % ~ 400 % in 1 % increments.
• Machine Status Confirmation
Displays the current machine status on LCD for confirmation.