Konica Minolta 7222 - Manual (Page 186)

9-16
Copying onto Transparent Films (Transparency Interleave)
Use the Transparency Interleave function in 1-1 or 2-1 mode to copy onto overhead
projection transparent films, and output a blank or copied interleaf sheet with each copied
transparent film.
In the Blank sheet interleaving mode, a blank interleaf sheet is output with each
transparent film to keep the film material from sticking together.
In the Copy sheet interleaving mode, a copied interleaf sheet is output with each
transparent film to provide reference during a presentation, a version for photocopying,
and a set for filing or inserting into a binder.
Specifications for Transparency Interleave
❒ Transparent film source: Multi-sheet bypass tray
❒ Print quantity: 1
❒ Finisher functions cannot be used. The Non-sort mode is used automatically, and
printed sheets will be delivered to TRAY 1 in the machine with FS-114, or to primary
(main) tray in the machine with FS-113.
❒ AMS is automatically selected.
❒ Incompatible Conditions: APS, 1-2, 2-2, Sort, Staple, Punch, Group, Rotation Sort, Rotation
Group, Mixed Original, Non-Standard Size, Sheet/Cover Insertion, Chapter, Booklet, Image
Insert, Non-Image Area Erase, Repeat, AUTO Layout
1.
Insert a sheet of transparent film into the Multi-sheet bypass tray.
• Do not load transparent films into any tray other than the bypass tray.
• Specify the Bypass paper type as OHP sheet. See p. 3-24.
2.
When interleaf sheet is needed, load copy paper in any other tray to
match the size of transparent films.
3.
Touch APPLICATION on the Basic Screen.
The Application Selection Screen will be displayed on the touch panel.
Blank sheets
Transparent films
Copied sheets
Transparent films
Copy Sheet Interleaving Blank Sheet Interleaving
Original