Konica Minolta 7222 - Manual (Page 30)

Requirements for Safe Use (continued)
1-12
Precautions for Routine Handling
WARNING: High Voltage
DO NOT TOUCH the high voltage parts indicated with WARNING label or described in the
guide.
CAUTION: Actions in Response to Troubles
• If the Service Call screen is displayed and copier operations cannot be continued, stop
operation to prevent any unexpected accident. Write down the report code (stated on the
2nd line of the message), then switch off the copier and disconnect from the power
socket. Contact your service representative and inform them of the report code.
• Do not touch high temperature parts indicated with CAUTION labels or described in the
guide.
• Do not touch the inside of the machine for any purpose other than removing jammed
paper or adding toner.
• If machine repair is necessary, be sure to contact your service representative. Never
attempt to repair it by yourself.
• If any abnormal sound, smell or smoke comes from the machine, immediately stop using
it, turn off the power switch, disconnect the power plug and contact your service
representative.
• If the breaker trips or the fuse blows, turn off the power switch, reset the breaker or the
fuse, and turn on the machine. If the same situation occurs again, contact your service
representative.
• Ensure the replacement fuse conforms with the rating of the power source. Never use a
fuse with an incorrect rating.
CAUTION: Prevention of Fire
Do not use volatile combustibles, such as thinner or alcohol, near the machine.
CAUTION: Prohibition of Machine Modification
Do not modify or remove any parts by yourself.