Konica Minolta 7222 - Manual (Page 197)

9-27
Erasing Outside of the Original (Non-Image Area Erase)
The Non-image area erase mode is used to copy non standard or special originals, such
as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the platen glass.
The exposed glass area outside the borders of the original will not be copied.
Specifications for Non-Image Area Erase
❒ Use the platen glass only. Keep RADF or platen cover open throughout the procedure.
❒ Incompatible Conditions: Using RADF, 2-2, 2-1, APS, Sort, Staple, Punch, Group,
Rotation Sort, Rotation Group, Mixed Original, Folded Original, Non-Standard Size,
Sheet/Cover Insertion, Chapter, Combination, Booklet, Image Insert, Upside Down,
Reverse Image, Image Shift, Stamp, Overlay
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Non-Image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
Set original
General copying Non-Image Area Erase
9
Applications
Reverse
Image
Non-Image
Area Erase
Book Copy
Image Insert
Transparency
Booklet
Combination
Chapter
Sheet/Cover
Insertion
Application
Selection Screen
Repeat
Upside Down
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Reduce &
Shift
Stamp
Overlay