Konica Minolta 7222 - Manual (Page 49)

Machine Configuration (continued)
2-17
1 FS-114 Finisher (option) sorts, staples and groups into finished sets.
2 Saddle kit (SK-114) (option) (stapling part) staples at two positions in the center of
output copies.
3 Saddle tray holds creased and stitched sets, and opens when supplying staples in the
stapler.
4 Extensible tray can be withdrawn to hold large-sized copies.
5 Branch kit (BK-114) (option) holds copied sheets when installed in FS-114 Finisher.
6 Saddle kit reset handle opens and then closes to reset the saddle kit (stapling part)
after supplying staples into the saddle kit stapler.
7 Saddle kit stapler staples into finished sets when using Fold&Stitch mode.
8 Finisher front door opens to the internal Finisher to allow removal of mishandled
paper, clearing trash basket, or supplying staples.
9 Lever 1 opens downward to remove mishandled paper.
10 Knob 2 can be turned counterclockwise to ease removal of mishandled paper.
11 Lever 3 opens downward to remove mishandled paper after removing the trash
basket.
12 Lever 4 opens downward to remove mishandled paper.
13 Knob 5 can be turned clockwise or counterclockwise to ease removal of mishandled
paper.
14 Knob 6 can be turned counterclockwise to ease removal of mishandled paper.
15 Stapler transferring knob can be turned to remove or set the stapler.
16 Saddle kit (SK-114) (option) (folding part) makes a fold line in the center of output
copy.
17 Trash basket holds waste paper punched out and can be withdrawn to clear.
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size