Konica Minolta 7222 - Manual (Page 14)

Features of the 7222/7228/7235 (continued)
x
• Paper Capacity
Maximum 2,050 sheets in the machine with DB-211 drawer, including four 500-sheet trays
and a 50-sheet Multi-sheet bypass tray.
Maximum 2,550 sheets in the machine with DB-411 drawer, including two 500-sheet trays,
a 1,500-sheet tray and a 50-sheet Multi-sheet bypass tray.
Maximum 4,550 sheets in the machine with DB-411 drawer and LT-203 large capacity tray,
including two 500-sheet trays, a 1,500-sheet tray, a 2,000-sheet tray and a 50-sheet Multi-
sheet bypass tray.
• Platen Memory
Scans documents into memory from the platen glass and/or the document feeder and
inserts the pages into another document copied from the document feeder. If an
incompatible function is selected in this mode, the latter function will not be selected, and
an Error message will be displayed.
• Power Saver
Automatically turns off all but nominal power supply after a specified period of copier
inactivity, for optimal efficiency. Power is returned after a brief warm up period by pressing
the power switch on the control panel.
• Proof Copy
To ensure correct output before running multiple copies, run a proof copy by pressing
[PROOF COPY] on the control panel or by touching PROOF COPY on the Check Screen.
• Punch Mode for Machine with FS-113 Finisher Installed:
Punches two or three holes in output copies.
• Repeat
Selects the horizontal image area across the page, and repeats it down the page as many
times as the repeat width setting (10 ~ 150mm) permits in manual or auto.
• Reserve
Scans in subsequent copy jobs while the machine is busy printing or copying.
• Reverse Image
Reverses the image from black-on-white to white-on-black or vice versa.
• Rotation
Rotates the image before copying when the portrait/landscape orientation of the original is
different from the orientation of the copy paper.
• Rotation Exit (Rotation Sort / Rotation Group)
When IT-101 Inner Tray or no Finisher is installed, Rotation Exit alternately switches the
horizontal and vertical orientation of each sorted set as it outputs to the exit tray. Be sure to
load both 8.5”x11” and 8.5”x11”R in separate trays (including the Multi-sheet bypass tray)
before selecting this feature.