Konica Minolta 7222 - Manual (Page 31)

Requirements for Safe Use (continued)
1-13
1
Safety
Information
CAUTION: Prevention of Machine Troubles
• Do not drop small metallic objects, such as paper clips or
staples, inside the machine.
• Do not place any heavy or hard objects such as a vase,
books or ornaments on the machine.
CAUTION: Recommendation of Periodic Check
Be sure to periodically check the following:
(1) The main cord or the power plug does not generate abnormal heat.
(2) The power plug is not inserted loosely or the cord is not cut or scratched.
(3) The grounding wire is correctly connected.
(4) The power plug or the power outlet is not covered with dust.
If you find anything abnormal with the above items, stop using the machine and contact
your service representative.
CAUTION: Toner
• Keep the toner cartridge away from children. The toner is nontoxic; however if you inhale
or contact with eyes by accident, flush with water and seek medical advice.
• Do not throw the empty toner cartridge into a fire. If it is thrown into a fire the toner may
ignite and cause a dangerous situation.
CAUTION: Paper
Check copy paper to be sure it conforms to the specifications outlined in Section 11.
• Do not use paper with any staples, or paper that conducts electricity (silver, carbon,
etc.), otherwise an accident may occur as a result of fire.
• To avoid machine trouble, do not use heat-sensitive paper, colored transparency, or
paper specifically designed for ink-jet printers, such as photo-paper.
CAUTION: Power Saver and Weekly Timer
• In Power Saver mode, the copier is still connected to the main power supply and power
is still applied to certain areas of the machine. To avoid any unexpected troubles, turn the
power OFF when not using the copier for long periods of time.
• When the Weekly Timer function is operating, turning power OFF will disable the
function.
CAUTION: Fixing Unit
The internal fixing unit is very hot. To avoid getting burned, DO NOT TOUCH. Be careful
when withdrawing the fixing unit.
WARNING: Drum Unit
The internal drum unit generates a high voltage.
To avoid an electrical shock, DO NOT TOUCH.