Konica Minolta 7222 - Manual (Page 304)

[9] Weekly Timer (continued)
13-40
[5] Password Setting
Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Procedure
1 Touch 5. Password setting to display the W.T. Interrupt Password Setting Screen.
2 Use the touch screen keypad to enter a 4-digit password, and then touch OK to complete
the setting.
NOTE:
When the password setting is 0000, timer interrupt can be used simply by turning
the copier OFF, then ON.
3 Touch RETURN to return to the Weekly Timer Setting Menu Screen.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.
Weekly Timer Setting Menu Screen W.T. Interrupt Password Setting Screen