Konica Minolta 7222 - Manual (Page 28)

Requirements for Safe Use (continued)
1-10
• Finisher FS-114 trays gradually go up/down while printed materials output,
depending on the tray selected. With SK-114 Saddle kit, the operation of the
trays become greater. DO NOT allow any object to interfere with the tray
operation on the left side of the finisher, as any interference may cause
damage to the finisher.
• DO NOT place any object or lean on SK-114 Saddle kit installed in Finisher
FS-114, otherwise machine trouble may occur.
Main body + DB-211 + LT-203 + FS-114 + SK-114 + BK-114
Unit: inches (mm)
77.0
(1957)
25.7
(652)
25.8
(655)
21.6
(550)
7.9
(200)
55.3
(1405)
24.0
(610) 3.9
(100)
23.4
(595)
63.8
(1621)
44.6
(1134)
53.1
(1350)
20.9
(530)
25.3
(642)
12.3
(312)
12.9
(328)
10.2
(259)