Copying using memory, To scan originals into memory (store mode), Copying using memory -26 – Konica Minolta 7222 User Manual
Page 88: To scan originals into memory (store mode) -26
3-26
Copying Using Memory
This section describes various copying features available on this machine using its built-in
memory.
To Scan Originals into Memory (Store Mode)
Store mode allows you to scan all the originals first, then to start a continuous printing job.
Use RADF store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the document feeder due to
thickness, size or condition.
RADF tray capacity is 50; however, more than 50 originals can be scanned into
memory using RADF store mode.
Specification for Store Mode
❒ Incompatible with RADF store mode: Image Insert, Book Copy
❒ Incompatible with Platen store mode: None
1.
Make copying selections, as desired.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch STORE on the Basic Screen to highlight it.
You may find the key already highlighted due to the copying selections made.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.