Kyocera FS-3700 - Manual (Page 39)

Feed Selection
The FEED key selects the paper feed cassette [
Cassette ] or multi
-purpose tray [
MP tray ] (or the option paper feeder[s], if installed)
as the paper source. The FEED key can be used whenever the message
display indicates
Ready or Add paper.
Press the FEED key. The selection cycles and is momentarily displayed in
the message display as:
Cassette
MP tray
The current selection is indicated by a green light on the printer symbol above the key.
On-line/Off-line Setting
By pressing the ON LINE key you can change the printer between the on-line state, in which it
prints the data it receives from the computer, and the off-line state, in which it stores the data
for printing later.
1. Make sure that the message display indicates
Ready .
2. Press the ON LINE key.
If the printer is on-line, it changes to off-line. If the printer is off-line, it changes back to on
-line.
The ON LINE indicator lights when the printer is on-line.
Going off-line may or may not halt communication between the printer and computer, de-
pending on details of the current interface. While off-line, the printer continues to accept any
data that arrives until the current interface buffer is full, at which point it instructs the com-
puter to stop sending data. Data stored while off-line are printed when the printer is returned
to the on-line state.
Abandoning a Printing Job
You can abandon a printing job before it is completed. If the printer is simultaneously receiv-
ing data on more than one interface, you can selectively cancel the printing job on a particular
interface.
This procedure can be used while the message display indicates
Processing or
Waiting .
2.2. Operating Procedures
2-7