Kyocera FS-3700 - Manual (Page 9)

❐ If you ship the printer, remove and ship the developer unit (and the waste toner bottle)
separately. The printer is originally supplied with a shipping container specifically de-
signed for the developer unit. Pack the developer unit in this container and the waste
toner bottle in the plastic bag obtainable from a toner kit and ship them separate from
the printer itself. Be sure to consult a serviceman before attempting long-distance
transportation of the printer.
ENERGY STAR
SM
As an E NERGY S TAR Partner, Kyocera Corporation has determined
that this product meets the E NERGY S TAR guidelines for energy effi-
ciency.
The basic objective of the E NERGY S TAR Program is to reduce environmental pollution by en-
couraging the manufacture and sale of equipment that uses energy more efficiently.
This printer is equipped with a sleep timer function that conforms with the standards of the
E
NERGY S TAR Program. This function makes it possible to reduce the amount of electrical power
consumed by the printer.
For maximum power savings, turn off the printer’s power supply when not using the printer
for extended periods of time.
For details on the sleep timer function and printer power consumption, refer to the instruction
manual provided with the printer.
Initial settings of the sleep timer function and power saved using the sleep
timer function:
Initial sleep mode setting
Power consumption in
sleep mode
FS-1700 30 minutes (30 minutes) 19 W (30 W)
FS-3700 30 minutes (60 minutes) 20 W (45 W)
( ): E NERGY S TAR program guideline
This product has been expressly developed and produced in the in-
terest of protecting the environment over its entire product life and
beyond.
Through the use of a new amorphous silicon drum and developer
Kyocera has created a revolutionary printing system that does not
require the wasteful replacement and disposal of a cartridge.
Introduction
viii