Setting the audio warning (buzzer) – Kyocera FS-3700 User Manual
Page 50
2.9. Setting the Audio Warning (Buzzer)
In addition to the message displayed when the paper supply is exhausted, or when paper jam-
ming occurs, an audio warning is made to sound. This is useful, for example, when the printer
is in a location some distance from the user.
The audio alarm is set to ON when leaving the factory. An audio alarm corresponding to the
type of printer error will sound according to the table below. If the alarm is set to OFF, it is
made not to sound.
Type of Error and Corresponding Audio Alarm (Buzzer)
Priority
Error Message
Alarm Frequency
Remarks
Short beeps: approx. 0.8 s
Long beeps: approx. 0.4 s
High
Replace Toner
Clean printr
short beeps
—
Replace waste-
toner bottle
short beeps
—
Clean printer
.. Press CONT
short beeps
—
Paper jam
short beeps
—
Face-down tray
paper full
short beeps
*
Option stacker
paper full
short beeps
**
Remove Opt.
Stacker paper
short beeps
**
Paper path error
short beeps
**
Memory overflow
.. Press CONT
short beeps
—
Print overrun
.. Press CONT
short beeps
—
KPDL error
.. Press CONT
short beeps
**
MEMORYCARD err
.. Press CONT
short beeps
**
Opt. ROM error
.. Press CONT
short beeps
**
Set paper
Press CONT
short beeps
—
Load paper
short beeps
—
Low
Add paper
long beeps
—
* Model FS-3700 only
** These error messages are displayed if the relevant option is fitted.
2.9. Setting the Audio Warning (Buzzer)
2-18