Kyocera FS-3700 - Manual (Page 8)

Canadian Department of Communications
compliance statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Avis de conformité aux normes du ministère des
Communications du Canada
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
ISO 7779
Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991: Der höchste Schalldruckpegel
beträgt 70 dB(A) oder weniger gemäß ISO 7779.
Disclaimer
We shall have no liability or responsibility to customers or any other person or entity with re-
spect to any liability, loss or damage caused or alleged to be caused directly or indirectly by
equipment sold or furnished by us, including but not limited to, any interruption of service,
loss of business or anticipatory profits, or consequential damages resulting from the use or op-
eration of the equipment or software.
Prolonged Non-Use and Moving the Printer
Prolonged Non-use
If you ever leave the printer unused for a long period of time, remove the power cord from the
wall outlet.
We recommend you consult with your dealer about the additional actions you should take to
avoid possible damages that may occur when the printer is used next time.
Moving the Printer
When you move the printer:
F
Move it gently.
F
Keep it as level as possible, to avoid spilling toner inside the printer.
Introduction
vii