KORG TRITON STUDIO music workstation - Manual (Page 126)

116
Name
This displays the song name of the selected SMF.
Play (Track Select) [Track01[Ch01]...Track16[Ch 16]]
Indicates the track (channel) that will sound when you play
the keyboard.
In Song Play mode, MIDI channels 1–16 correspond to
tracks 1–16.
Selected Track Information
This area displays information on the track (1–16) currently
selected for editing.
T (Track) No.: Bank No.: Prog No. and name
This displays the track number, and the bank, number and
name of the program selected for that track.
Ch 01...16
This displays the MIDI channel number of the track.
■ 1.1–1b: UTILITY
For details on how to select the desired utility function, refer
to “PROG 1.1–1c: UTILITY.”
GM Initialize
This command transmits a GM System On message to Song
Play mode, resetting all tracks to the GM settings (refer to
the table below).
In Song Play mode when a GM System On message is
received from an external device or if the SMF contains
a GM System On message, the tone generator will be
reset to the GM settings in the same way as when this
command is executed (However even in these cases, the
parameters of the 7.3: Master Fx will not be reset).
Solo Selected Track
When you select this command and check the menu page,
only the selected track will sound and the remaining tracks
will be muted (the Solo function). To solo a different track,
select one of the parameters of that track (
☞ SEQ 1.1–1d).
If a track muted by the Mute or Solo function has a
“Status” (3.1–1(2)a) of EXT or BTH, the MIDI note-on/
off messages of that track will not be transmitted.
Load Template Song
This command loads a preset template song (one of sixteen
types P00–15) or a user template song (one of sixteen types
U00–15) into the song (
☞ SEQ 1.1–1d).
Save Template Song
This command saves the programs, the track parameters,
and the effect settings etc. as a user template song U00–15
(
☞ SEQ 1.1–1d).
The settings that are saved here can also be loaded in
Sequencer mode.
Set Location
By pressing the [LOCATE] key you can move to the location
specified here (
☞ SEQ 1.1–1d).
GM Initialize Parameters
* The various KARMA parameters in S.PLAY 6.1–6.4 will maintain their values, and will not change.
Parameter Track1–9, 11–16 Track10
1.1 Bank/Program G000:*A.Piano g(d)000:STANDARD Kit
Pan C064 C064
Volume 100 100
3.1 Status – – The setting remains unchanged
3.2 Use Program’s Scale – – The setting remains unchanged
7.1 IFX/Indiv.Out BUS Select L/R DKit
Send1(MFX1) 0 0
Send2(MFX2) 40 40
7.2 IFX1–5 – – The setting remains unchanged
Pan(CC#8) – – The setting remains unchanged
BUS Select – – The setting remains unchanged
Send1 – – The setting remains unchanged
Send2 – – The setting remains unchanged
Other Insert Effect parameters – – The setting remains unchanged
7.3 MFX1 – – 016: St. Chorus
MFX2 – – 053: Rev Smth. Hall
Return1 – – 127
Return2 – – 050
Other Master Effect and Master EQ parameters – – Default settings