KORG TRITON STUDIO music workstation - Manual (Page 227)

Ef
fect
217
097: Early Reflect
(Early Reflections)
This early reflection effect has more precise early reflections
with twice the maximum length of a normal-size effect
(Fx:041). You can create a very smooth and dense sound.
098: LCR Long Delay
(L/C/R Long Delay)
This multitap delay outputs three Tap signals to left, right and
center respectively. You can set a maximum of 2,730msec for
the delay time.
099: St/Cross LDly
(Stereo/Cross Long Delay)
This is a stereo delay, and can by used as a cross-feedback
delay effect in which the delay sounds cross over between left
and right by changing the feedback routing. You can set a
maximum of 1,360msec for the delay time.
a
Type Sharp, Loose, Modulated, Reverse
Selects the decay curve for the early reflection
☞
Fx:041
b
ER Time
Sets the time length of early reflection 10...1600ms
c
Pre Delay 0...200ms
Sets the time taken from the original sound to the first early reflection
d
Pre EQ Trim 0...100
Sets the input level of EQ applied to the effect sound
e
LoEQ (Pre Low EQ Gain)
Sets the gain of Low EQ –15.0...+15.0dB
HiEQ (Pre High EQ Gain)
Sets the gain of High EQ –15.0...+15.0dB
f
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
a
L Delay (L Delay Time)
Sets the delay time of TapL 0...2730ms
Level
Sets the output level of TapL 0...50
b
C Delay (C Delay Time)
Sets the delay time of TapC 0...2730ms
Level
Sets the output level of TapC 0...50
c
R Delay (R Delay Time)
Sets the delay time of TapR 0...2730ms
Level
Sets the output level of TapR 0...50
d
C Fb (C Delay Feedback)
Sets the feedback amountof TapC –100...+100
(Source) Off...Tempo
Selects the modulation source of the TapC feedback amount
(Amount) –100...+100
Sets the modulation amount of the TapC feedback amount
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
Pre Delay Early Reflections
LEQ HEQ
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High Damp Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
e
HiDamp (High Damp)
Sets the damping amount in the high range 0...100%
☞
Fx:043
LoDamp (Low Damp)
Sets the damping amount in the low range 0...100%
☞
Fx:043
f
InLvl Mod (Input Level Dmod [%]) –100...+100
Sets the modulation amount of the input level
☞
Fx:037,
Src (Source)
Selects the modulation source for the input level Off...Tempo
☞
Fx:037
g
Spread 0...50
Sets the width of the stereo image of the effect sound
☞
Fx:043
h
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
a
Stereo/Cross Stereo, Cross
Switches between stereo delay and cross-feedback delay
b
L Delay (L Delay Time)
Sets the delay time for the left channel 0.0...1360.0ms
c
R Delay (R Delay Time)
Sets the delay time for the right channel 0.0...1360.0ms
d
L Fb (L Feedback)
Sets the feedback amount for the left channel –100...+100
(Source) Off...Tempo
Selects the modulation source of feedback amount
(Amount L) –100...+100
Sets the modulation amount of the left channel feedback
e
R Fb (R Feedback)
Sets the feedback amount for the right channel –100...+100
(Amount R) –100...+100
Sets the modulation amount of the right channel feedback
f
HiDamp (High Damp)
Sets the damping amount in the high range 0...100%
☞
Fx:043
g
LoDamp (Low Damp)
Sets the damping amount in the low range 0...100%
☞
Fx:043
h
InLvl Mod (Input Level Dmod [%]) –100...+100
Sets the modulation amount of the input level
☞
Fx:037,
Src (Source)
Selects the modulation source for the input level Off...Tempo
☞
Fx:037
i
Spread –50...+50
Sets the width of the stereo image of the effect sound
☞
Fx:043
j
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
Delay
Delay
Stereo/Cross
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Spread Stereo/Cross