KORG TRITON STUDIO music workstation - Manual (Page 59)

COMBI
1.1
2.1
2.2
2.3
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4.4
6.1
6.2
6.3
6.4
7.1
7.2
7.3
49
Here you can set the Combination mode functions of the B-
mode functions of real-time CONTROLS knobs [1]–[4], and
[SW1] key, [SW2] key.
2.2–1: Ctrls
(Controls)
2.2–1a: Knob B Assign
These settings assign functions (mainly various control
changes) to the “B” mode of the real-time CONTROLS
knobs [1]–[4] (
☞ p.231 “Realtime Control Knobs B Assign
List”).
The functions you specify here will be controlled when you
operate the real-time CONTROLS knobs [1]–[4] in “B”
mode.
Since the real-time CONTROLS knob [1]–[4] function of the
B mode assignments made for the program assigned to each
timbre are not valid for the combination, they must be
newly set by these parameters.
Knob1–B (Knob1–B Assign) [Off...MIDI CC#95]
Knob2–B (Knob2–B Assign) [Off...MIDI CC#95]
Knob3–B (Knob3–B Assign) [Off...MIDI CC#95]
Knob4–B (Knob4–B Assign) [Off...MIDI CC#95]
2.2–1b: SW1/2 Assign
These settings assign the function of the [SW1] key and
[SW2] key (
☞ p.230 “SW1, SW2 Assign List”).
Since the function assignments of the [SW1] key and [SW2]
key made for the program assigned to each timbre are not
valid for the combination, they must be newly set by these
parameters.
SW1 (SW1 Assign) [Off...AfterT Lock]
SW1 Mode [Toggle, Momentary]
SW2 (SW2 Assign) [Off...AfterT Lock]
SW2 Mode [Toggle, Momentary]
( ☞ PROG 2.2–1b)
■ 2.2–1c: UTILITY
☞ “Write Combination,” “Solo Selected Timbre” (1.1–1c)
This page is displayed if the separately sold EXB-MOSS
option is installed.
(
☞ EXB-MOSS owner’s manual & p.269 “EXB-MOSS
option”)
3.1–1: MIDI
Here you can make MIDI settings for each timbre.
3.1–1a: Status, MIDI Channel, Bank(EX2) MSB/LSB
Status [INT, Off, EXT, EX2]
Specifies the status of MIDI and the internal tone generator
for each timbre.
INT:
When you play this instrument, the internal tone gen-
erator will sound, and will also sound in respond to MIDI
messages received from an external MIDI device.
Off:
The program will not sound. Nor will MIDI data be
transmitted.
EXT:
Playing this instrument will not cause it to sound, but
will transmit data via MIDI to control external MIDI
devices.
EX2
: “Bank (EX2) MSB” and “Bank (EX2) LSB” (3.1–1a) will
be enabled. Instead of the bank numbers for A–G(d) that can
be selected on this instrument, the bank numbers you spec-
ify here will be transmitted via MIDI. In other respects this is
the same as EXT.
COMBI 2.2: Ed–Ctrl
COMBI 2.3: Ed–MOSS
2.2–1a
2.2–1b 2.2–1c
COMBI 3.1: Ed–Param1
3.1–1a
3.1–1b
On-board controllers
KARMA
Tone
generator
MIDI IN
INT
On-board controllers
KARMA
MIDI IN
EXT, EX2
MIDI OUT