KORG TRITON STUDIO music workstation - Manual (Page 176)

166
4. Controlling the Master Effects via
MIDI
You can use the Dynamic Modulation (Dmod) function to
control all Master Effects parameters in real-time from this
instrument’s controllers or from an external MIDI sequencer.
In Program mode, the parameters are controlled on MIDI
Global channel “MIDI Channel” (GLOBAL 2.1–1a).
In Combination mode, Sequencer mode, and Song Play
mode
, you can set the control channels for MFX1 and MFX2
using the Setup page “Control Channel” parameters of the
“MFX1–2” tabs. Select the desired option from Ch01–16, and
Gch
.
Ch01–16: Select this option if you wish to control the param-
eters for each Master Effect on different channels.
Gch:
Select this option if you wish to control the parameters
on MIDI Global channel “MIDI Channel” (GLOBAL 2.1–1a).
This is the normal setting.
The Master EQ (stereo, three-band EQ) is located right
before AUDIO OUTPUT (MAIN) L/MONO, R. Low and
High EQs are of the shelving type, and Mid EQ is a peaking
type equalizer. You can control the Low Gain and High Gain
parameters using the Dynamic Modulation function.
The Master EQ (stereo, three-band EQ) is applied to the sig-
nal input from the L/R bus. For more information on the
parameters,
☞ p.220.
This instrument is equipped with two individual AUDIO
OUTPUTs (INDIVIDUALs). You can route the oscillator
(Program), timbre (Combination), and track (Sequencer and
Song Play) output or the post-IFX signals to these two indi-
vidual outputs.
Use “BUS Select” (7.1–1a) in Program, Combination,
Sequencer, or Song Play mode to route the oscillators (Pro-
gram), timbres (Combination), or tracks (Sequencer and
Song Play) to AUDIO OUTPUTs (INDIVIDUAL).
If you are using the Insert Effects, use “BUS Select” of the
7.2: Ed–InsertFX (or Insert FX), and Setup page to route the
post-IFX signals.
1, 2:
Monaural signals are routed to AUDIO OUTPUTs
(INDIVIDUAL).
1/2:
Stereo signals are routed to AUDIO OUTPUTs (INDI-
VIDUAL).
Program mode
Master EQ
Individual Outputs
Pan
Oscillator 1
Send1
Select from:
L/R
IFX1
IFX2
IFX3
IFX4
IFX5
1
2
1/2
Off
IFX2 BUS IFX2
IFX1 BUS IFX1
Chain
✓
MFX2
MFX1
mono
mono
Return1 / 2
Master EQ AUDIO OUTPUT
(MAIN) L/Mono, R
IFX4 BUS IFX4
IFX3 BUS IFX3
IFX5 BUS IFX5 BUS Select
= L/R
Oscillator 2
IFX / Indiv.Out
BUS Select
stereo
Insert Effects
Post IFX
Pan(CC#8)
BUS Select
Select from:
L/R
1
2
1/2
Off
Send2
stereo
Master Effects
AUDIO OUTPUT
(INDIVIDUAL)1/2
L/R BUS
stereo
mono x 2 mono x 2
BUS Select
= IFX1
stereo
stereo
stereo
stereo
stereo
Chain
Effect / Mixer Block Diagram in Program Mode
7.2: Insert Effect
Post IFX
Send1 / 2
7.3: Master Effect
✓
✓
✓