Kathrein UFS 740sw - Manual (Page 20)

20
FIRST INSTALLATION: One cable
Use the

buttons here to select “One cable” as the “System”. Press the

button to move to the next
menu item. The following display appears:
Number of satellites
Use the

buttons to select how many satellites (max. 2) you would like to receive with your reception
system. Press the

button to move to the next menu item.
Confi gure satellites
Press the button to open the menu. The following display appears:
Satellite and Position
Use the

buttons to select the fi rst satellite (satellite 1 of 2, depending on the setting) as shown on
the screen.
LNB settings
Here use the

buttons to select the LNB type used in your system. The choice is between “Universal”,
“Wideband” and “user-defi ned”.
If in your reception system you use a single-cable LNB (e.g. UAS 481 from Kathrein), please select
here the setting “Wideband”. If you use a single-cable matrix (EXU 908) or a single-cable switching
matrix (EXR 551 or EXR 552) from Kathrein, the LNB you use must be a “Universal LNB”!
The various options for a
single-cable system with
Kathrein components
are summarised at the
end of this manual in the
“Technical Appendix”
sectionunder “Examples of
Single-Cable Systems”.