Kathrein UFS 740sw - Manual (Page 24)

24
FIRST INSTALLATION: One cable (manual)
If no connection to the single-cable system could be established, the following display appears:
Check your settings (frequency and transmission channel) and if necessary call for expert help.
Confi rm this display with the button. Then press the

button. You will be asked whether you wish to save
the changes. Use the

buttons to select “Yes, save
changes” and confi rm by pressing the button. Now
press the
!
(green) button.
The receiver will automatically display the menu for the channel search. Continue with the section (Execute
channel search).
Secure channel with PIN
If your single-cable system allows the transmission frequency to be protected by inputting a PIN, this is the
menu where that can be done. No other receiver can then use that transmission frequency unless the
PIN is input.
Select the setting “Yes” using the

buttons. A line with the text “Password PIN” is then displayed.
Press the

buttons to select this line. You can now use the number buttons to enter a PIN (0-255).
Test connection
When you have completed all the settings, press the

buttons to switch to the “Test connection”
selection fi eld and press the button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the
single-cable system, you will see the following display: