Kathrein UFS 740sw - Manual (Page 61)

61
Newly found channels are identifi ed with the designation “New” after the channel name. After completion
of the scan, you will see the following message (example):
Press the button. You will be asked whether you wish to save the changes or not. Selection is performed
using the

buttons and is confi rmed using the button. If you select “Yes, save changes”, the newly
found channels will be added to the end of the channel list. Then press the

button to exit the menu.
The channel list is called up on to the TV screen by pressing the button (see also section “On-screen
displays” “Channel list TV/Radio”).
MANUAL (CHANNEL) SCAN
CHANNEL SEARCH (CHANNEL SCAN)
After a scan (of whatever type) the receiver shows all newly found channels in
the channel list under the rubric “New Channels”. You will fi nd this rubric in
the Channel List at the end of the green satellite channel lists (selection using
the

buttons).