Kathrein UFS 740sw - Manual (Page 76)

76
TECHNICAL APPENDIX
FEATURES
Reception of digital TV and radio satellite
programmes
4,000 channel memory positions
16-character alphanumeric display with status
icons for indication of channel names and
transmitter information
Common interface for two CA modules ¹ )
Kathrein Convenience EPG with timer
programming ²
)
Guided fi rst installation with country setting
Pre-programmed channel list
31 satellites pre-programmed
12V power supply for mobile use
230V power supply for stationary use
Mounting accessories for fl at or suspended
mounting
Antenna level indication via TV set (optical and
acoustic) for the manual alignment of a satellite
antenna (Sat fi nder)
Suitable for software download via satellite
and PC
8 favourite channel lists for TV and 8 for radio
Automatic date and time generation via DVB
data stream
On-screen display (OSD) in 8 languages
(D, GB, F, I, E, CZ, L, TR)
1000 timers (series and interval timers)
Language selection for multilingual broadcasts
Optical and electrical audio output for Dolby
Digital data stream (AC 3)
Composite colour, Y/C and RGB signal output
programmable via the Scart socket
Cinch sockets for AV signal
Videotext decoder with 800 page memory
capacity and videotext generation
Automatic 4:3 and 16:9 format recognition
(choice of viewing format)
Channel search
Programme position sort function
DiSEqC TM 1.0, CAP command set and SCR
single-cable system control signals
Integrated electronic reverse polarity
protection
Infrared remote control with command set
switching
On/Off switch
(disconnection from the 12 V supply)
External infrared sensor, allows receiver to
be hidden (included with the receiver)
¹ ) CA module is not included in the delivery scope
² ) Display of information only if broadcast by the programme provider