Kathrein UFS 740sw - Manual (Page 65)

65
PARENTAL CONTROL
Select the “Parental Control” menu using the menu button

, the

buttons on the main menu
and . You are now prompted to enter the PIN code (factory default setting: 0000). After entering the
PIN using the keypad you are shown the following display:
Select the parameters to be changed using the

buttons.
BLOCKING THE MAIN MENU
Use the

buttons (On/Off) to select whether the main menu should be blocked. If the menu is
blocked, changes can be made only by entering the four-digit PIN code.
BLOCKING THE RECEIVER
Use the

buttons (On/Off) to select whether the receiver should be blocked. If the receiver is blocked,
it can be operated only by entering the four-digit PIN code after it is switched on (factory setting: 0000).
Also pay attention to the bars
at the bottom of the on-screen
display! This provides hints on
what to do next.
Press the

button to exit the menu again.
Press to replace the old PIN with a new one. Enter the new (four-digit) PIN. For security you must repeat
the new PIN code once again. Confi rm the change of PIN code by pressing the button.
SETTING A NEW CODE (PIN)
Keep your password in a safe place, so that you always have access to your channels
even if you might have forgotten it.
If you have forgotten your password, you must contact your dealer, who will be able
to unlock your receiver for you.