Kathrein UFS 740sw - Manual (Page 25)

25
Selection “UAS 481” or “EXR 551”
Transmission channel
Use the

buttons to select a free available transmission channel. A maximum of four transmission
channels are available (1400, 1516, 1632 and 1748 MHz).
Test connection
When you have set a free transmission channel, press the

buttons to switch to the “Test connection”
selection fi eld and press the button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display:
FIRST INSTALLATION: One cable (manual)
When the “UAS 481” single-cable
feed system is being used, it is
essential that the LNB is set to
“Wideband”!
When the “EXR 551” single-cable
switching matrix is being used, it
is essential that the LNB is set to
“Universal”!
If no connection to the single-cable system could be established, the following display appears:
Check your settings and if necessary call for expert help.
Confi rm this display with the button. Then press the

button. You will be asked whether you wish to save
the changes. Use the

buttons to select “Yes, save
changes” and confi rm by pressing the button. Now
press the
!
(green) button.
The receiver will automatically display the menu for the channel search. Continue with the section (Execute
channel search).