Kathrein UFS 740sw - Manual (Page 48)

48
When all settings have been made, press the button to save the recording settings. You can view
the scheduled recording in the recording schedule view of the EPG (see item “Recording schedule”).
SERIES RECORDING
Use the

buttons to select the
recording mode “Series recording”.
In series recording the start and fi nish
of recording are taken automatically by
the receiver from the EPG data. You
can only specify a lead-in and run-out
time to be sure to record the complete
programme even if transmission
times may vary slightly. The setting
of lead-in and run-out time is done
using the

buttons or the
keypad.
Series recording depends on the EPG data being kept up to date at all times. The
receiver automatically updates the EPG data when the unit is switched off by
pressing the

button. Updating is important because it enables the receiver
to recognise for purposes of recording any changes to scheduled transmission
times of the series, provided these were incorporated in the EPG data supplied
by the channel provider in advance of the latest EPG update.
EPG - ELECTRONIC PROGRAMME GUIDE
When all settings have been made, press the button to save the recording settings. You can view
the scheduled recordings in the recording schedule view of the EPG (see item “Recording schedule”).