Kathrein UFS 740sw - Manual (Page 42)

42
SCAN FUNCTION
The scan function can be called up at any time in EPG by pressing the

button.
The scan function allows you to search for programmes based on their additional information or their name.
Use the keypad to input the desired search expression (see also “Operating Instructions” “Alphanumeric
Input”).
When you have input the desired search expression, press the button to start the scan.
You can then use the cursor buttons (
 
) to select the desired programme from the search result
and if available you can use the button to call up further information on the desired programme.
EPG - ELECTRONIC PROGRAMME GUIDE
Using the

(red dot) button you can load the selected programme into the recording settings (see item
“Recording”).