Kathrein UFS 740sw - Manual (Page 40)

40
“COMING UP” VIEW (PROGRAMME LISTINGS)
The “Coming up” view (programme listings) can be called up at any time in EPG by pressing the
"
(yellow)
button.
EPG - ELECTRONIC PROGRAMME GUIDE
In the “Coming up” view you will see all the programmes that will be shown in the previous “Current” list
of selected channels. Provided that EPG data has been supplied by the channel provider, the receiver
shows the programmes that will be shown on the selected channel for several days in advance.
You can use the cursor buttons (
 
) to select the desired programme and if available you can
use the button to call up further information on the desired programme.
You can use the

buttons to scroll through the channels in the order of the overall chan-
nel list (the channels can also be selected by inputting digits with the keypad); you remain however
in “Coming up”.
The
&
button allows you to scroll backwards and forwards a day at a time.
Using the

(red dot) button you can load the selected programme into the recording settings (see item
“Recording”).
Also pay attention to the bars
at the bottom of the on-screen
display! This provides hints on
what to do next.
The

button allows you to look ahead in 15-minute steps to future programmes for the channels
(press the

button to return to the current time).
If you wish to view the programme currently being shown on a channel, you need not exit the EPG, just
select the desired channel and press the button. At the top right of the screen you will see the current
TV picture for the selected channel. The picture however only appears once the button has been
pressed. Previously what you saw was the picture of the old channel that had previously been selected,
even though the EPG was no longer set to that channel.