Kathrein UFS 740sw - Manual (Page 71)

71
SERVICE MENU
Select the “Service” menu using the menu button

, the

buttons on the main menu and .
The following display appears:
Current SW Version
Channel list status
Last update run
Hardware version
Start of the warranty period ² )
Software and hardware version CAP ¹ )
UPDATING SOFTWARE
The receiver checks in standby mode whether a new software version is available and, if it is, displays the
following message the next time the receiver is started up:
Use the

buttons to select from the displayed options and press to confi rm your selection:
• “Load in standby”: When the receiver is switched to “Standby” mode the new software is loaded
• “Remind later”: The message reappears the next time the receiver is started up
• “Don’t load”: The software is not loaded and the download must be launched manually.
To load the software manually:
Use the

buttons to switch to “Software Update” and to call it up press the button. The following
display appears (next page):
1) Displayed only if the UFS 740 is operated with a CAP unit (Kathrein turntable unit)