Kathrein UFS 740sw - Manual (Page 72)

72
SERVICE MENU
UPDATE Software
Use the

buttons (No/Yes) to select whether you wish to load the new software that is available.
If you are unsure whether you wish to load the new software, you can initially set the reply to “No”.
If you do agree to the changes, you can then proceed to download the software.
Channel list
Select the required satellite using the

buttons. Available options:
- “only update”: Your existing list will only be updated, any new channels found will be added at the
end of the channel list. The sort sequence of your channel list remains unchanged; the only change
is that the channel data (transmission frequency etc.) are updated
- “do not load”: Your existing list will not be edited (nor updated nor overwritten)
- “overwrite”: Your existing channel list will be completely superseded by a new list of available
channels. Your personal channel sorting will be lost. If you select “overwrite”, you will additionally
see displayed the line “pre-sorted for”. Use the

buttons to switch to this line and use the

buttons to select the desired pre-sorting. Your available options are: Germany, Austria and
Switzerland.
Also pay attention to the bars
at the bottom of the on-screen
display! Messages here provide
information on what to do next.