Lexmark 4227 - Manual (Page 113)

107
Chapter 5: Printer Options
P
rinter Options
Loading Cut Sheets in the Tractor 2 Feeder
Use the manual feed tray on the Tractor 2 Feeder to load single
sheets. Use only single sheets of paper or single-part forms.
1
Turn the printer On.
2
Make sure the paper path is clear. If continuous forms are
loaded in the printer, park them:
a
Tear off the leading edge of the continuous forms.
b
Press Load/Unload to park the continuous forms.
3
Push the paper select lever up to the single sheet position.