Lexmark 4227 - Manual (Page 132)

Chapter 6: Solving Printer Problems
126
Solving Printer Problems
Display Messages
Message Description
Ready (IBM) The printer is online and ready to accept data, and IBM PPDS
mode is selected.
Ready (EPSON) The printer is online and ready to accept data, and Epson
emulation mode is selected.
001 Paper Empty/
Add Paper The printer is out of paper or the paper is not loaded
properly. Load paper in the printer. For help, see “Selecting
and Loading Paper” on page 55.
002 Paper Jam
Remove Paper Clear paper jam. Remove any debris from inside the printer.
005 Cover Open
Close Cover Top Cover is open or not properly closed. Close the top
cover.
007 Data Error Data transmission error in Serial Interface. Check the serial
settings on the function menu to make sure they are correct.
Check that the serial cable is properly connected at both ends.
00D I/F Error Interface mode switch was changed after the printer was
turned on. Return the printer to the appropriate interface
mode (RS-232 or RS-422).
6XX Machine Chk A Hardware error occurred. If this happens, turn off the
printer, fix the paper jam or other problem, then turn the
printer back on. If the error occurs again, contact your point
of purchase, or see the printer registration card for the
number appropriate for your country.
FastDraft FastDraft font is selected.
Draft Draft font is selected.
Gothic Gothic font is selected.