Lexmark 4227 - Manual (Page 69)

63
Chapter 4: Selecting and Loading Paper
S
e
lecting and Loading Paper
To load an envelope:
a
Place a single envelope against the left paper guide, with
the top edge first, print side up.
b
Move the right paper guide so that it aligns with the right
edge of the envelope.
The Paper Empty/Add Paper message disappears.
• If Auto Cut Sheet Load is On (factory default), the paper
feeds automatically to the TOF. To turn Auto Cut Sheet
Load On, see “Setting Auto Cut Sheet Load” on page 64.
For more information about setting TOF, see “Setting TOF
for Single Sheets and Envelopes” on page 78.
• If Auto Cut Sheet Load is Off, press FormFeed.
9
Make sure the printer is online (Ready light is on solid). If it is
not, press Start/Stop until the Ready light is on solid. You are
now ready to print.
Address added
to show correct
orientation.