Lexmark 4227 - Manual (Page 49)

43
Chapter 3: Using the Operator Panel
Using the Operator Panel
Data Options Buffer Size
Controls the size of the buffer
between the computer and the
printer.
Maximum, Minimum
Automatic LF
Automatically performs a line feed
(LF) when a carriage return (CR) is
sent.
On, Off
Automatic CR
Automatically performs a carriage
return (CR) when a line feed (LF) is
sent.
On, Off
Slashed Zero
Prints all zeros with a slash through
the center.
On, Off
Control Options Uni-Dir Print
Tells the printer to print uni-
directionally or bidirectionally.
(Select On for high-quality, one-way
printing, or select Off for fast, two-
way printing).
On, Off
Auto Rdy Cut Sht
(Auto Ready Cut Sheet)
– When set to On, the printer
automatically loads a cut form.
– When set to Off, you must press
FormFeed or LineFeed to load a
cut form.
On, Off
Paper Out Alarm
Sounds an alarm when the printer is
out of paper.
Enable, Disable
Main Menu Primary Options Secondary Options