Lexmark 4227 - Manual (Page 58)

Chapter 3: Using the Operator Panel
52
Using the Operator Panel
Setting and Using a Macro
You can use up to four macros to store your settings permanently. To set a
macro, follow these steps:
1
Press Menu.
2
Press Item
↓
until Default Macro appears.
3
Press Next
→
and then Item
↓
until Macro x (x = 1 to 4) appears.
4
Press Store to save the setting.
5
Press Prev.
←
and then Item
↓
until Macro x Options appears.
6
Set and store your settings (see “Macro x Options” on page 40 for a
list of items you can set in your macro).
7
Press Quit.
To use a macro:
1
Press Menu.
2
Press Item
↓
until Load Macro appears.
3
Press Next
→
until Macro x (x = 1 to 4) appears.
4
Press Store to save the setting.
5
Press Quit.