Lexmark 4227 - Manual (Page 84)

Chapter 4: Selecting and Loading Paper
78
S
e
lecting and Loading Paper
Setting TOF for Single Sheets and Envelopes
TOF can range from minus 2.54 cm (1 in.) to plus 55.88 cm (22 in.)
from the top of cut sheet paper. To set and save TOF:
1
Turn the printer On.
2
Make sure continuous forms are parked (press Load/Unload.)
The operator panel displays a Paper Empty/Add Paper
message.
3
Move the paper select lever up to the single sheets position.
4
Load a cut sheet of paper or envelope through the manual
feed.
The printer moves the paper or envelope to the current TOF.
5
Press Menu. Set Top Of Form appears.
6
Press any paper movement key (Micro
↓,
Micro
↑,
or
LineFeed ) to move the paper or envelope to the appropriate
position.
7
Press Store to save the position you want. The Ready light
comes on solid.
When you reload paper at a later time, press Start/Stop. The
paper moves to the TOF.
Setting TOF in a Macro
Each macro has a separate TOF setting. To set TOF in a macro:
1
Select the macro you want to use. For help selecting a macro,
see “Setting and Using a Macro” on page 52.
2
Set Top of Form. For help, see “Setting TOF for Continuous
Forms” on page 76 or “Setting TOF for Single Sheets and
Envelopes” on page 78.
3
Press Store to save the settings in the currently selected macro.