Lexmark 4227 - Manual (Page 78)

Chapter 4: Selecting and Loading Paper
72
S
e
lecting and Loading Paper
10
Set the left margin. Adjust the tractors so that the print start
position you want aligns with the symbol [A printed on the
rear plate.
Note: If you make a left margin setting in your application
software, it is added to the left margin setting on the
printer.
For example, if you set the left margin at 1 inch (2.54
cm) on the printer, and also have the left margin set at
1 inch (2.54 cm) in your application software, the
printer begins printing 2 inches from the left edge of
the page.
11
Push down the left tractor locking lever to lock the tractor in
place. Remove slack from the paper and lock the right lever.
Printing starts at the [A symbol
The distance from the [A symbol to the left edge of the
paper determines the width of the left margin.