Top-of-form (tof), Setting tof for continuous forms – Lexmark 4227 User Manual
Page 82
Chapter 4: Selecting and Loading Paper
76
S
e
lecting and Loading Paper
Top-Of-Form (TOF)
Top-Of-Form (TOF) sets the first line of print. You can set and save
TOF from the operator panel for single sheets, continuous forms,
and for each macro that is enabled.
Setting TOF for Continuous Forms
TOF can range from minus 2.54 cm (1 in.) to plus 35.56 cm (14 in.)
from the top of continuous form paper.
Note:
Use this method to set TOF for continuous forms loaded in
the optional Tractor 2 Feeder.
To set and save TOF:
1
Turn the printer On.
2
Make sure the paper path is clear.
3
Move the paper select lever down to the continuous forms
position.
4
Load continuous form paper on the feed pins (or Tractor 2
feeder pins if you are using the Tractor 2 Feeder option).
5
Press Start.
The paper moves to the current TOF.