Lexmark 4227 - Manual (Page 47)

41
Chapter 3: Using the Operator Panel
Using the Operator Panel
Paper Handling Options
If “Enable” is selected in
“Default Macro”, this item
appears in the macro menu.
Auto Tear-Off
If on, moves the top perforation of a
continuous form to the tear bar.
On, Off, One Second
Auto Cut Sheet Load
If on, automatically loads cut sheets
into the printer.
On, Off
Auto Sheet Feed
Automatically feeds cut sheets if
using Auto Sheet Feeder.
Does not appear when the Tractor 2
Option is installed.
On, Off
Tractor
Select this option when you want to
set the default tractor.
Does not appear unless the Tractor
2 Option is installed.
Tractor 1, Tractor 2,
Tractor 1 + 2
Form Length
Allows you to specify the length of
the paper you are using.
1LPP/0.17” to
132LPP/22.00”
Left Margin 0”, 1”, 2”, 3”
Right Margin 4”, 5”, 6”, 7”, 8”, 13.6”
Bottom Margin 0”, ½”, 1”, 2”, 3”
Lines Per Inch
Adjusts the number of lines that
print per inch.
3, 4, 6, 8
Eject by FormFeed
Automatically ejects your print job
when it has finished printing.
On, Off
Main Menu Primary Options Secondary Options