Linksys SRW2016 - Manual (Page 101)

91 Chapter 5: Using the Web-based Utility for Configuration
Spanning Tree Tab on SRW2048 Switches - RSTP Interface Settings
WebView Switches
one or more network layer protocols. When each of the chosen network layer protocols has been configured,
packets from each network layer protocol can be sent over the link. The link remains configured for
communications until explicit LCP or NCP packets close the link, or until some external event occurs. This is the
actual switch port link type. It may differ from the administrative state.
Point-to-Point Operational Status. The Point-to-Point operating state.
Activate Protocol Migration. When checked, enables PPP sending Link Control Protocol (LCP) packets to
configure and test the data link.
To modify the settings on this screen, click the Edit icon, which resembles a pencil, to open the edit screen.
Click the Submit button to save any of your changes on this screen.