Linksys SRW2016 - Manual (Page 46)

36 Chapter 5: Using the Web-based Utility for Configuration
Switch Conf. (Configuration) Tab - Bridge Multicast Forward All
WebView Switches
Switch Conf. (Configuration) Tab - Bridge Multicast Forward All
The Bridge Multicast Forward All screen contains fields for attaching ports or LAGs to a switch that is attached to
a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded to the
appropriate port or VLAN.
VLAN ID. Displays the VLAN for which Multicast parameters are displayed.
Ports. Ports that can be added to a Multicast service.
The table on this screen displays the IGMP port and LAG members management settings:
• F - Forbidden ports, which are not included in the multicast group, even if IGMP snooping designated the
port to join a multicast group.
• S - Attaches the port to the Multicast group as a static member.
• D - The Port/LAG has joined the multicast group dynamically.
• Blank - The port/LAG is not attached to a multicast group.
Figure 5-25: Switch Configuration -
Bridge Multicast Forward All