Linksys SRW2016 User Manual
Page 26
16
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
WebView Switches
SSL Certificate Generation
Use the Certificate Generation screen to specify a device-generated certificate.
The following fields are specified:
Public Key Length - Specifies the SSL RSA key length. (Range: 512 - 2048)
Organization Name - Specifies the organization name. (Range: 1 - 64)
Locality or City Name - Specifies the location or city name. (Range: 1 - 64)
State or Province Name - Specifies the state or province name. (Range: 1 - 64)
Country Name - Specifies the country name. (Range: 2 - 2)
Validity Term - Specifies number of days certification is valid. (Range: 30 - 3650)
SSL_Certificate_Generation.bmp
Show Certificate
Use the Show Certificate screen to display the internal certificate.
IP Configuration
The IP Configuration screen displays these choices: the Switch’s IP Address Settings, HTTP, HTTPS Configuration
and Network Configuration.
Figure 4-18: SSL Certificate Generation
Figure 4-19: SSL Certificate
Figure 4-20: IP Configuration