Linksys SRW2016 - Manual (Page 32)

22 Chapter 5: Using the Web-based Utility for Configuration
Sys. Info. (System Information) Tab - Forwarding Database
WebView Switches
Sys. Info. (System Information) Tab - Forwarding Database
The Forwarding Database screen lets you define the aging interval of the Switch.
Aging Interval (15-630) (secs). This specifies the aging-out period on the Forwarding Database.
Click the Submit button to save your changes.
A table of VLAN (Virtual Local Area Network) entries is listed.
VLAN ID. Displayed here is the ID number of the VLAN for this entry.
MAC Address. This is the MAC address of the entry.
Port. This is the port number for this entry.
ifIndex. This is the interface for this entry.
Status. This indicates how the entry was created, Dynamic (dynamically learned) or Static (statically configured).
You can add or edit a forwarding interface by clicking the icon that looks like a sheet of paper. This will allow you
to configure the following settings:
Interface. Select the appropriate interface, either a port number or LAG (Link Aggregation Group) number.
MAC Address. Enter the MAC address for this entry.
VLAN ID. If you want to use a VLAN ID, then select the radio button and enter the ID number of the VLAN.
VLAN Name. If you want to use a VLAN Name, select the radio button and then enter a name here.
Status. Select the status of your entry, Permanent, Delete On Reset, or Delete On Time Out.
Click the Submit button to save your changes.
Figure 5-5: Forwarding Database - Add Entry
Figure 5-4: System Information - Forwarding Database