Linksys SRW2016 - Manual (Page 89)

79 Chapter 5: Using the Web-based Utility for Configuration
SNMP Tab
WebView Switches
• SNMP-Admin - User has access to all device configuration options, as well as permissions to modify the
community.
View Name. Contains a list of user-defined SNMP views
To add a community, click the paper and pencil icon. You can configure all the fields on the SNMP Communities
screen, on the new screen that appears. Then, click the Submit button to add the community.
SNMP Communities Advanced Tables
Management Station. Displays the management station IP address for which the advanced SNMP community is
defined.
Community String. Defines the password used to authenticate the management station to the device.
Group Name. Defines advanced SNMP communities group names.
Advanced. (Only used with SNMP v3.) Contains a list of user-defined groups. When SNMP Advanced mode is
selected, the SNMP access control rules comprising the group are enabled for the selected community. The
Advanced mode also enables SNMP groups for specific SNMP communities. The SNMP Advanced mode is
defined only with SNMPv3.
Configuring SNMP Notifications
The SNMP Notification Properties screen contains parameters for defining SNMP notification parameters.
Enable SNMP Notifications. Check this box to enable the Switch to send SNMP notifications.
Enable Authentication Notifications. Check this box to enable the Switch to send SNMP Authentication failure
notifications.
Click the Submit button to save your changes on this screen. Figure 5-75: SNMP - Properties