Maintenance tab - telnet, Maintenance tab - reset, Maintenance tab - file download – Linksys SRW2016 User Manual

Page 92

Advertising
background image

82

Chapter 5: Using the Web-based Utility for Configuration
Maintenance Tab - Telnet

WebView Switches

Maintenance Tab - Telnet

The Telnet screen lets you connect to the Switch through telnet, a terminal emulation TCP/IP protocol.

Connect Via Telnet. If you use a telnet connection, click Connect Via Telnet. The HyperTerminal screen will
automatically appear.

Maintenance Tab - Reset

The Reset screen lets you reset the Switch from a remote location.

Reset the Device. If you want to reset the Switch, click Reset the Device. You will be asked to confirm the
reset. Click the OK button. After the Switch is reset, you will be prompted for a user name and password before
you can access the Web-based Utility.

Maintenance Tab - File Download

The File Download screen lets you download firmware or a configuration file to the Switch. You cannot download
both at the same time.

Firmware Download. If you want to download firmware, click this radio button. If this is selected, then the
Configuration Download fields will not be available.

Configuration Download. If you want to download a configuration file, click this radio button. If this is selected,
then the Firmware Download fields will not be available.

Firmware Download

TFTP Server IP Address. Enter the IP address of the TFTP server.

NOTE: Before you reset the Switch, you should update your startup configuration file so you will not
lose your current configuration settings.

NOTE: You can perform only one type of download at a time.

Figure 5-78: Maintenance - Telnet

Figure 5-79: Maintenance - Reset

Figure 5-80: Maintenance - File Download

Advertising
This manual is related to the following products: