Linksys SRW2016 - Manual (Page 76)

66 Chapter 5: Using the Web-based Utility for Configuration
Statistics Tab - RMON Events Control
WebView Switches
Statistics Tab - RMON Events Control
The RMON Events Control screen shows the RMON events you have configured.
Event Entry. This identifies the event.
Community. This is the community to which the event belongs.
Description. This is the description of the event.
Type. This is the event type, Log, Trap, Log and Trap, or None. Log indicates that the event is a log entry. Trap
indicates that the event is a trap. An event can be both a log entry and a trap. None indicates that no event has
occurred.
Time. This is the time at which the event occurred.
Owner. This is the user that defined the event.
To delete an entry, click its X icon.
To add an entry, click the paper and pencil icon. On the new screen that appears, you can configure the following
settings:
Event Entry. This is the number of the event.
Community. Enter the name of the event’s community.
Description. Describe the event in this field.
Type. Select the event type, Log, Trap, Log and Trap, or None. Log indicates that the event is a log entry. Trap
indicates that the event is a trap. An event can be both a log entry and a trap. None indicates that no event has
occurred.
Owner. Enter the name of the user defining this event.
Click the Submit button to save your changes.
Figure 5-61: Statistics - RMON Events Control