Linksys SRW2016 - Manual (Page 54)

44 Chapter 5: Using the Web-based Utility for Configuration
Security Tab - RADIUS Server
WebView Switches
Dead Time (0-2000). Enter the number of minutes that a RADIUS server is bypassed for service requests. To use
the default, click the Use Default checkbox.
Key String (0-128 Characters). Enter the pre-shared key in this field. To use the default, click the Use Default
checkbox.
Source IP Address. Enter the source IP address used for communication with the RADIUS server. To use the
default, click the Use Default checkbox.
Usage Type. This is the RADIUS server authentication. Select Log in if you want the RADIUS server used for
authentication of usernames and passwords. Select 802.1x if you want the RADIUS server used for 802.1x
authentication. Select All if you want the RADIUS server used for authentication of usernames and passwords, as
well as 802.1x authentication.
Default Parameters
Default Retries (1-10). Enter the number of retries allowed before a failure occurs. To use the default, click the
Use Default checkbox.
Default Timeout for Reply (1-30). Enter the default number of seconds the Switch waits for an answer from the
RADIUS server before retrying the query or switching to the next server.
Default Dead Time (0-2000). Enter the default number of minutes that a RADIUS server is bypassed for service
requests.
Default Key String (0-128 Characters). Enter the default pre-shared key in this field.
Source IP Address. Enter the default source IP address used for communication with the RADIUS server.
Click the Submit button to save your changes.