Linksys SRW2016 - Manual (Page 37)

27 Chapter 5: Using the Web-based Utility for Configuration
Switch Conf. (Configuration) Tab - Interface Conf. (Configuration)
WebView Switches
Current Back Pressure. Displayed here is the status of the port’s Back Pressure mode.
Flow Control. You can enable or disable the port’s Flow Control feature.
Current Flow Control. This is the flow control status of the port.
MDI/MDIX. Select the Auto setting if you want the port to automatically detect the cable type. Select MDI if the
port is connected to an end station. Select MDIX if the port is connected to a hub or another switch.
Current MDI/MDIX. This is the current MDI/MDIX status of the port.
LA. This indicates if the port is part of a LAG.
Storm Control. You can enable or disable the port’s Storm Control setting.
PVE. For Gigabit Ethernet switches ONLY. When a port is a Private VLAN Edge (PVE) port, it bypasses the
Forwarding Database and forwards all unicast, multicast, and broadcast traffic to an uplink, except for MAC-to-
me packets. Uplinks can be ports or LAGs.
Click the Submit button to save your changes.