LG G4F-AD3A - Manual (Page 14)

Chapter 2. SPECIFICATIONS
2 - 3
2) G6F-AD2A
Items Specifications
I/O points 16 points
Voltage
1 ~ 5 VDC (input resistance 1 )
0 ~ 10 VDC (input resistance 1 )
-10 ~ 10VDC (input resistance 1 )
Current DC4 ~ 20 mA (input resistance 250 )
Analog
input
Voltage/Current selection
- Selection with Terminal
( It has to be connected between V and I terminal to select current. )
- Selection of voltage range by switch on the side of module
Digital output
-
12 bit binary value(-48 ~ 4047, -2048 ~ 2047)
-
Digital output value is selected by program.
1 ~ 5VDC 1 mV (1/4000)
0 ~ 10VDC 2.5 mV (1/4000)
-10 ~10VDC 5 mV (1/4000)
Maximum
resolution
DC 4 ~20mA 4 (1/4000)
Overall Accuracy 0.5% (accuracy to full scale)
Max . conversion speed 5.0 ms/channel
Max . absolute input Voltage : 15V, Current : 25mA
Number of analog input point 4 channels/module
Isolation
Between input terminals and PLC: Photo coupler isolation
(Between channels : Non-isolated)
Terminals connected 18-point terminal block
+5VDC 40mA
+15VDC 50mA
Current
Consumption
-15VDC 20mA
Weight 200g
[Table 2.2] Performance Specifications
CAUTION
The factory-set value of A/D conversion module has been current input mode.
The G6F-AD2A has to be used with the GM6-PAFB.
!