LG G4F-AD3A - Manual (Page 48)

Chapter 6 Buffer memory
6 - 1
6 Buffer memory
The A/D module has buffer memory used for data exchange with CPU module. This chapter
describes the configuration and contents of buffer memory.
6.1 The configuration of buffer memory
6.1.1 G6F-AD2A
Address
(decimal)
Name Description
Default
value
Remark
00 Channel enable Enable / disable channel operation h00 R / W
1
01 Output data range Assign the range of digital output value h00 R / W
02
Average count
processing enable Enable / disable average count processing
per each channel
h00 R / W
03 Avg. count of Ch0 Assign the count of Avg. processing of Ch0 h02 R / W
04 Avg. count of Ch1 Assign the count of Avg. processing of Ch1 h02 R / W
05 Avg. count of Ch2 Assign the count of Avg. processing of Ch2 h02 R / W
06 Avg. count of Ch3 Assign the count of Avg. processing of Ch3 h02 R / W
07 Data enable Make enable the new setting of buffer 0 ~ 6 h00 R / W
08 Ch0 digital output value Digital output value of channel 0 - R
2
09 Ch1 digital output value Digital output value of channel 1 - R
10 Ch2 digital output value Digital output value of channel 2 - R
11 Ch3 digital output value Digital output value of channel 3 - R
12 Channel status Indicate run/stop of each channel - R
13 Ch0 error code
Shows error code when an error occurred
on channel 0
- R
14 Ch1 error code
Shows error code when an error occurred
on channel 1
- R
15 Ch2 error code
Shows error code when an error occurred
on channel 2
- R
16 Ch3 error code
Shows error code when an error occurred
on channel 3
- R
* All 16-bit data
1
R/W : Read and write are both available
2
R : Read only