Post error codes – Lenovo J SERIES 3000 User Manual

Page 70

Advertising
background image

Beep Symptom

FRU/Action

1 long and 2 short beeps Monitor or video adapter card
error

Perform the following actions in order.

1. Make sure the monitor is properly connected to the

computer.

2. Replace the video adapter card (if present).

3. Replace the system board.

1 long and 3 short beeps Keyboard error

Perform the following actions in order.

1. Make sure the keyboard is properly connected to the

keyboard connector.

2. Replace the keyboard.

3. Replace the system board.

1 long and 9 short beeps BIOS ROM error

Perform the following actions in order.

1. Start the Setup Utility program and press F7 to

load defaults and then press F10 to Save and exit.
See Chapter 6 “Diagnostics, Test and Recovery
Information” on page 41.

2. Perform a Boot block recovery. See “Recovering from

a POST/BIOS update failure” on page 186.

3. Replace the system board.

Continuos long beeps DRAM memory error

Perform the following actions in order.

1. Make sure the memory module(s) are properly seated

in the connector(s).

2. Replace the memory module(s).

3. Replace the system board.

POST error codes

Each time you power-on the system, it performs a series of tests that check the operation of the system
and some options. This series of tests is called the Power-On Self-Test, or POST. POST does the following
operations.

• Checks some basic system-board operations

• Checks the memory operation

• Starts the video operation

• Verifies that the boot drive is working

If the POST detects a problem, an error message appears on the screen. A single problem can cause several
error messages to appear. When you correct the cause of the first error message, the other error messages
probably will not appear on the screen the next time you turn on the system.

POST Error Message

Description/Action

CMOS battery failed

The CMOS battery is no longer functional.

Replace the battery.

CMOS checksum error - defaults loaded

Checksum of CMOS is incorrect.

The computer loads the default configuration settings.
This error might indicate that CMOS has become corrupt
due to a weak CMOS battery.

64

Hardware Maintenance Manual Lenovo 3000 J Series

Advertising